Use Code: NEWUSER for 10% Off Amount,FREE SHIPPING on order above $219

How to Choose a No-Drill Column Mount for a Total Station

How to Choose a No-Drill Column Mount for a Total Station

A no-drill column mount can support a total station where an approved structural column is available and a tripod would occupy needed floor space. Check the instrument thread, working clearance and line of sight before choosing a mount. The Mountlaser HDCC01B clamp kit uses a 5/8-11 interface and includes an MP109D double-sided mini prism as a separate target.

When does a column clamp make sense?

Use a column position when your project allows the mounting surface and the position can see the required control and target points. A tripod may be easier when you need to relocate frequently or change the instrument position to recover blocked sight lines. Before committing to a column, consider traffic, access for service and whether the support itself could move during the monitoring period.

Five checks before choosing a total station column mount

  1. Confirm the instrument interface. Check the base or tribrach drawing for the thread and seating surface. The HDCC01B has a 6 in flat platform with a 5/8-11 mount. An instrument with a different interface may require manufacturer-approved hardware.
  2. Check the instrument envelope. Account for the full rotation of the instrument, battery access and cables. The HDCC01B quick guide lists a 15 in (38 cm) centerline offset. Compare that nominal figure with the actual clear space at your column.
  3. Check height adjustment. The clamp offers 12 in (30 cm) of vertical adjustment. Identify the required instrument elevation and verify that the planned sight line remains useful across the targets you intend to observe.
  4. Review the column and strap route. The clamp has a 2 in × 10 ft nylon ratchet strap. Check the shape, surface, unobstructed strap path and site-approved loading and installation conditions. The nominal strap length alone does not establish a maximum usable column diameter.
  5. Plan the control and target locations. Decide which points are stable references and which are monitored objects. The USACE Structural Deformation Surveying manual provides project-level guidance for monitoring design and observation procedures.

Why include a double-sided mini prism?

A prism target and an instrument mount do different jobs. The HDCC01B supports the instrument; the included MP109D is a separate target to place at a point you want to observe. A double-sided prism can offer another viewing face when the project geometry allows it. Confirm the face orientation, prism constant and target height for the instrument and measurement method you use. The MP109D product page shows the target style.

HDCC01B quick reference

Check Quick guide specification
Instrument mount 6 in flat platform; 5/8-11
Vertical adjustment 12 in (30 cm)
Centerline offset 15 in (38 cm)
Clamp weight 13.8 lb (6.25 kg)
Clamp carton 60 × 30 × 33 cm (23.6 × 11.8 × 13 in)

Frequently asked questions

Do I need to drill the column?

The HDCC01B uses a ratchet strap around the support. Confirm that the column and proposed installation are approved for your site.

Does the mini prism replace my tribrach?

No. The MP109D is supplied as a survey target. Check your instrument and tribrach separately for compatibility with the clamp.

Will the kit arrive in one box?

The clamp ships from China. The included prism ships from an overseas warehouse and may arrive in a separate parcel.

View the HDCC01B column clamp and MP109D kit or browse rail and prism accessories to compare other target options.

What are you looking for?

Your cart